Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
Use this guide to replace the LCD screen of the BlackBerry 7290.
Ce dont vous avez besoin
-
-
Apply pressure to the lock button on the back of the device.
-
Slide the battery cover down towards the bottom of the device, revealing the battery compartment.
-
-
-
Locate the four screws along the perimeter of the back casing.
-
Remove the four top screws using a T-6 torx screwdriver.
-
-
-
-
To remove the phone's internals, start by loosening one side by pulling gently.
-
-
-
Locate a hook on the right side of the internals below the volume wheel.
-
Use a plastic opening tool to gently pry the hook, separating the LCD display from the logic board mounting plate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.