Pièces

Aucune pièce nécessaire.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Ajouter un commentaire

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Ajouter un commentaire

Lift off the back cover.
  • Lift off the back cover.

Ajouter un commentaire

Remove the two T6 screws.
  • Remove the two T6 screws.

Ajouter un commentaire

Remove the daughterboard. Remove the exposed vibration motor.
  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nick Alejandro

Membre depuis le 24/01/2010

3 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 14-44, Regan Winter 2010 Membre de l'équipe Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,448