Introduction

This will show you how to repair the vibrating motor in your blackberry.

Pièces

Aucune pièce nécessaire.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Ajouter un commentaire

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Ajouter un commentaire

  • Lift off the back cover.

Ajouter un commentaire

  • Remove the two T6 screws.

Ajouter un commentaire

  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Ajouter un commentaire

  • Replace with new vibration motor

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

Membre depuis le 24/01/2010

12 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 14-44, Regan Winter 2010 Membre de l'équipe Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 7

Total : 4,371