Introduction

Use this guide to replace the keyboard cover of your BlackBerry Curve 8520.

Pièces

Aucune pièce nécessaire.

  1. Insert a plastic opening tool into the small notch on the rear cover of the phone.
    • Insert a plastic opening tool into the small notch on the rear cover of the phone.

    • Pry the rear cover up from the phone.

    Ajouter un commentaire

  2. Locate the slit between the top of the battery and the casing.
    • Locate the slit between the top of the battery and the casing.

    • Gently apply pressure on the top of the battery to trigger the spring release.

    Ajouter un commentaire

    • Remove the two Torx T6 screws to the left and right of the battery.

    Ajouter un commentaire

    • Using hairdryer or heat gun, warm the front panel to soften the adhesive beneath.

    • Starting from one side, use a plastic opening tool to pry up the screen cover.

      • Work carefully to avoid bending the screen cover.

    • Once one side is loose, gently peel up the entire cover.

    Ajouter un commentaire

    • Insert the plastic opening tool in the seam along the side of the device.

    • Slide the tool along the length of the seam, applying moderate force with the plastic opening tool.

    • Carefully remove the faceplate.

    Ajouter un commentaire

    • Remove four T6 Torx screws from the front of the phone.

    • Using tweezers, remove the keyboard buttons from the phone.

    bb is nt a freely phone is a phone bcz of ringing some how it is nt

    tankiso - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

27 autre(s) ont terminé cette réparation.

Matt

Membre depuis le 07/04/2011

1 710 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 9-62, Walters Spring 2011 Membre de l'équipe Cal Poly, Team 9-62, Walters Spring 2011

CPSU-WALTERS-S11S9G62

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 15

Total : 34,623