Pièces

Aucune pièce nécessaire.

  1. Remove battery cover and battery on the back of the device.
    • Remove battery cover and battery on the back of the device.

  2. Using a plastic opening tool, remove the bottom cover.
    • Using a plastic opening tool, remove the bottom cover.

    • This will reveal 6 screws on the back, remove the screws and be careful not to lose them.

    • Remove the rear cover of the device.

    • Remove the motherboard part of the phone from the last piece of case by releasing the black tabs on both sides.

    • Detach the ribbon cable on the front of the motherboard.

    • Remove the screen to keep it from being damaged.

    • Detach the antenna wire at all 3 locations.

    • Tilt the motherboard up and detach both ribbon connections.

    • Remove the motherboard.

    • Replace the entire center piece of the case to replace the antenna.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnny Tran

Membre depuis le 10/09/2011

473 Réputation

4 tutoriels rédigés

Équipe

Cuesta, Team 1-3, Zipperian Fall 2011 Membre de l'équipe Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 membres

8 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 4

Total : 5,591