1. Remove battery cover and battery on the back of the device.
    • Remove battery cover and battery on the back of the device.

    Ajouter un commentaire

  2. Using a small plastic opening tool, remove the lower rear cover.
    • Using a small plastic opening tool, remove the lower rear cover.

    Ajouter un commentaire

    • Remove six screws from the midframe of the device.

    Ajouter un commentaire

    • Remove the midframe from the phone.

    Ajouter un commentaire

    • Gently pry the back the plastic tabs that secure the motherboard to the case.

    • Slowly work your way around the case until the tabs until the motherboard comes free.

    • Remove the motherboard.

      • The keypad and navigation ball may become loose and fall away from the motherboard.

    Ajouter un commentaire

    • Detach the ribbon cable on the front of the motherboard.

    Ajouter un commentaire

    • Remove the screen to keep it from being damaged.

    Ajouter un commentaire

    • Carefully detach the antenna from the two clips on the side of the motherboard.

    • Carefully disconnect the antenna from the motherboard.

    Ajouter un commentaire

    • Lift the up motherboard from the bottom edge to reveal to ribbon cables.

    • Carefully disconnect the two ribbon cables connecting the motherboard and display.

    • Remove the motherboard.

    Ajouter un commentaire

    • Replace the entire center piece of the case to replace the speaker.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Johnny Tran

Membre depuis le 10/09/2011

473 Réputation

4 tutoriels rédigés

Équipe

Cuesta, Team 1-3, Zipperian Fall 2011 Membre de l'équipe Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 7,626