Ce dont vous avez besoin
-
-
Carefully remove the top plastic cover. It is held in place by adhesive.
-
-
-
Remove the two Philipps #0 screws that hold in place the top of the phone frame and slide it off.
-
-
-
Remove the back cover. It mostly just clips off, but has some adhesive in the lower area.
-
-
-
-
Remove the two Philipps #0 screws securing the battery connector and unplug the later.
-
-
-
Remove the three Philipps #0 screws securing the upper cover and remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
14 autres ont terminé cette réparation.