Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Press the cover release button on the bottom of your device. Lift and remove the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
From the top, use your fingernail to lift the battery out.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the six 7.0mm Torx screws securing the rear case to the rest of the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the plastic opening tool to remove the rear case.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With the same plastic opening tool, lift the motherboard up and out.
-
Remove the motherboard assembly from left to right, using caution near the audio jack on the right side of the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a spudger, lift the ribbon band in the upper right-hand corner up and away from the motherboard assembly until it disconnects.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the motherboard assembly over.
-
Starting at the lower corners of the screen, begin to lift the screen away from the motherboard using the spudger.
-
Remove the plastic bit that hides the speaker grill - it is stuck with double-sided tape.
-
With a thin blade/pin, ease the speaker grill and the metal plate away from the old lcd screen.
-
Annulation : je n'ai pas terminé ce tutoriel.
8 autres ont terminé cette réparation.