Aller au contenu principal

Introduction

The process of replacing the trackpad of your BlackBerry Bold 9900 will allow you to become familiar with your device and restore full functionality of the trackpad.

  1. Place phone screen down.
    • Place phone screen down.

    • Use your finger to life upward on the battery case.

    • Pull the cover away from the battery.

  2. Lift the edge of battery with the green stripe upward to remove battery.
    • Lift the edge of battery with the green stripe upward to remove battery.

  3. The SIM Card is located where the red rectangle is shown. To remove SIM Card, push the card inward towards the top of the phone then release. The SIM card will be ejected.
    • The SIM Card is located where the red rectangle is shown.

    • To remove SIM Card, push the card inward towards the top of the phone then release. The SIM card will be ejected.

  4. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  5. Lift the bezel at the bottom of the phone up and peel it away from the phone. Lift the bezel at the bottom of the phone up and peel it away from the phone.
    • Lift the bezel at the bottom of the phone up and peel it away from the phone.

  6. Remove the two exposed screws using the T5 Torx screwdriver. Remove the two exposed screws using the T5 Torx screwdriver.
    • Remove the two exposed screws using the T5 Torx screwdriver.

  7. Now lever the keyboard up using the screwdriver in the indicated hole.
    • Now lever the keyboard up using the screwdriver in the indicated hole.

  8. The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard. The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.
    • The keyboard is attached via a ribbon cable. Pull the cable up to remove the keyboard.

  9. Push into the trackpad. This will release the trackpad supporting piece. Push into the trackpad. This will release the trackpad supporting piece. Push into the trackpad. This will release the trackpad supporting piece.
    • Push into the trackpad. This will release the trackpad supporting piece.

  10. The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad. The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad.
    • The trackpad is attached via ribbon cable. Pull this cable up in order to release the trackpad.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Chris Velasquez

Membre depuis le 30/01/2018

193 Réputation

2 tutoriels rédigés

Équipe

Baylor, Team S1-G4, Johnson Spring 2018 Membre de l'équipe Baylor, Team S1-G4, Johnson Spring 2018

BU-JOHNSON-S18S1G4

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 339