Aller au contenu principal

Blu Studio Selfie Midframe Replacement

Ce dont vous avez besoin

  1. Blu Studio Selfie Midframe Replacement, Rear Cover: étape 1, image 1 de 1
    • Make sure your phone is powered off.

    • Turn the front of the phone away from you.

    • Run your fingers along the sides of the phone to identify where the case can be pulled apart.

  2. Blu Studio Selfie Midframe Replacement: étape 2, image 1 de 1
    • Insert the flat end of your plastic opening into the crevice you found along the side of the phone.

    • Gently apply pressure until you feel the back case pop free of the phone.

    • Continue the previous two steps around the rest of the phone until the case is fully removed.

  3. Blu Studio Selfie Midframe Replacement, Battery: étape 3, image 1 de 2 Blu Studio Selfie Midframe Replacement, Battery: étape 3, image 2 de 2
    • Identify the crevice at the bottom of the battery.

    • There should be enough space for you to fit your fingernail between the battery and the phone.

    • Gently lift the battery free of the phone.

  4. Blu Studio Selfie Midframe Replacement, Midframe: étape 4, image 1 de 1
    • Remove all the 4mm Phillips #000 screws from the midframe.

  5. Blu Studio Selfie Midframe Replacement: étape 5, image 1 de 1
    • Insert the spudger between the midframe and the display assembly.

    • Gently pry up the midframe.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but the regular black nylon spudger or a plastic opening tool should be used whenever possible.

  6. Blu Studio Selfie Midframe Replacement: étape 6, image 1 de 1
    • Where the battery rested before, you will find a small clip that holds down the midframe.

    • After the rest of the midframe is detached, from the phone place the flat end of the spudger beneath the clip.

    • Gently lift up on the clip until it comes free.

    • Remove the midframe from the phone.

Ligne d'arrivée

2 autres ont terminé cette réparation.

Samuel McCandless

Membre depuis le 01/20/16

170 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team 10-1, Remmell Spring 2016 Membre de l'équipe USF Tampa, Team 10-1, Remmell Spring 2016

USFT-REMMELL-S16S10G1

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 433