Aller au contenu principal

Boosted Board 1st Generation Rear Wheels Replacement

Ce dont vous avez besoin

  1. Boosted Board 1st Generation Rear Wheels Replacement, Rear Wheels: étape 1, image 1 de 2 Boosted Board 1st Generation Rear Wheels Replacement, Rear Wheels: étape 1, image 2 de 2
    • Loosen the two 16.74 mm motor mount hex nut screws with a 9/64" Allen wrench.

    • Do Not Remove the Screws.

  2. Boosted Board 1st Generation Rear Wheels Replacement: étape 2, image 1 de 1
    • Compress the motor mount back towards the wheel.

    • While keeping the motor mount compressed, tighten one of the hex nuts that you loosened in the previous step.

    • The motor mounts are spring tensioned so it is necessary compress them to loosen the belts.

  3. Boosted Board 1st Generation Rear Wheels Replacement: étape 3, image 1 de 2 Boosted Board 1st Generation Rear Wheels Replacement: étape 3, image 2 de 2
    • Remove the axel nut with a 1/2" socket wrench

  4. Boosted Board 1st Generation Rear Wheels Replacement: étape 4, image 1 de 3 Boosted Board 1st Generation Rear Wheels Replacement: étape 4, image 2 de 3 Boosted Board 1st Generation Rear Wheels Replacement: étape 4, image 3 de 3
    • Rotate and pull counterclockwise until the wheel comes off the axle completely.

    • The front washer will come off with the wheel.

    • Remove the back washer from the axle.

    • Replacing the wheel requires the bearings to be switched into the new wheel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Emily Imfeld

Membre depuis le 10/06/16

532 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 15-7, Livingston Fall 2016 Membre de l'équipe Cal Poly, Team 15-7, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G7

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 4

Total : 1,259