Réparez vos affaires Communauté Boutique

Boosted Board 1st Generation Remote Battery Replacement

Introduction

There is nothing more irritating than halfway through your ride your remote dies. Even though today's battery technology keeps improving, batteries eventually die. Luckily batteries are relatively easy to replace.

This guide will instruct you how to properly disassemble your remote and replace the battery. Keep in mind the area around scroll wheel has levers and moving parts inside, so be cautious while opening and closing the remote.

Ce dont vous avez besoin

  1. Boosted Board 1st Generation Remote Battery Replacement, Remote Battery: étape 1, image 1 de 3 Boosted Board 1st Generation Remote Battery Replacement, Remote Battery: étape 1, image 2 de 3 Boosted Board 1st Generation Remote Battery Replacement, Remote Battery: étape 1, image 3 de 3

    • Before disassembling your remote, be sure it is powered off.

    • Remove the four 17.57mm screws from the bottom of the case with a PH0 screwdriver.

    Modifier

    hi my name is Eugene.  I have a question .  My skateboard remote is gone.  remotes are not sold in my country.  what should i do how can i use the skateboard .  we sell remotes from another company.  how can it be adjusted to my boosted mini .  help me solve the issue please.

    Evgeny Bubnov - Réponse

  3. Boosted Board 1st Generation Remote Battery Replacement: étape 2, image 1 de 2 Boosted Board 1st Generation Remote Battery Replacement: étape 2, image 2 de 2

    • Carefully separate the two halves of the casing by pulling them apart at the seam.

    • Be sure to keep the scroll wheel, lever and buttons attached to the housing.

    Modifier

  4. Boosted Board 1st Generation Remote Battery Replacement: étape 3, image 1 de 3 Boosted Board 1st Generation Remote Battery Replacement: étape 3, image 2 de 3 Boosted Board 1st Generation Remote Battery Replacement: étape 3, image 3 de 3

    • Remove the rectangular black adhesive foam on top of the battery by peeling it away from the battery.

    • Desolder the battery connections from the circuit board.

    • Replace the dead battery with a new 3.7 volt lithium polymer battery.

    • Refer here for more information how to desolder the battery.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Kevin Manko

Membre depuis le 10/06/16

164 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team 15-7, Livingston Fall 2016 Membre de l'équipe Cal Poly, Team 15-7, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G7

4 membres

6 tutoriels rédigés

4 commentaires

Where can I get the battery? Or can you give specs? Thanks!

Dan Davie - Réponse

hi my name is Eugene.  I have a question .  My skateboard remote is gone.  remotes are not sold in my country.  what should i do how can i use the skateboard .  we sell remotes from another company.  how can it be adjusted to my boosted mini .  help me solve the issue please

Evgeny Bubnov - Réponse

You can't use 3rd party remotes with proprietary Boosted products.

Tom Tamaira -

Verified this works with V2 and V3 remotes as well. I did a R29 and it works great. Thank you for the info.

Thayne Christiansen - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 23

Total : 4,622