Introduction
This guide can be used to remove and replace the Circuit Board for the Bose Cinemate 10. There are no prerequisite replacement guides to replace the Circuit Board. It should take approximately 10 mins to complete this replacement guide.
Ce dont vous avez besoin
-
-
Locate the cable input port, on the back of the device.
-
Remove the 2, PH1, 15mm screws.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
3 commentaires
Where do I buy the circuit board from.
Where do I find the circuit board from