Réparez vos affaires Communauté Boutique

Bose Soundlink Revolve Bottom Circuit Board Replacement

Introduction

Use this guide to replace the bottom motherboard of your device.

Ce dont vous avez besoin

  1. Bose Soundlink Revolve Bottom Circuit Board Replacement, Bottom Circuit Board Access: étape 1, image 1 de 2 Bose Soundlink Revolve Bottom Circuit Board Replacement, Bottom Circuit Board Access: étape 1, image 2 de 2

    • Flip speaker over so that the bottom is facing up.

    • Using the blue spudger, lift the gray foam up and slowly peel it off with your hand.

    Modifier

  2. Bose Soundlink Revolve Bottom Circuit Board Replacement: étape 2, image 1 de 3 Bose Soundlink Revolve Bottom Circuit Board Replacement: étape 2, image 2 de 3 Bose Soundlink Revolve Bottom Circuit Board Replacement: étape 2, image 3 de 3

    • Using the screwdriver, unscrew three screws.

    • Detach the bottom cover from the rest of the speaker by pulling the two in opposite directions.

    Modifier

  4. Bose Soundlink Revolve Bottom Circuit Board Replacement: étape 3, image 1 de 2 Bose Soundlink Revolve Bottom Circuit Board Replacement: étape 3, image 2 de 2

    • Remove the screw that is above the charging port.

    Modifier

  5. Bose Soundlink Revolve Bottom Circuit Board Replacement: étape 4, image 1 de 2 Bose Soundlink Revolve Bottom Circuit Board Replacement: étape 4, image 2 de 2

    • Remove the two screws connecting the motherboard to the bottom cover of the speaker.

    • Remove the bottom cover.

    Modifier

  6. Bose Soundlink Revolve Bottom Circuit Board Replacement, AUX/USB Port: étape 5, image 1 de 3 Bose Soundlink Revolve Bottom Circuit Board Replacement, AUX/USB Port: étape 5, image 2 de 3 Bose Soundlink Revolve Bottom Circuit Board Replacement, AUX/USB Port: étape 5, image 3 de 3

    • Using the blue plastic opening tool, pry up the small black clamp connecting the AUX/USB port to the lower circuit board.

    • Remove the AUX/USB port from the device.

    Modifier

  7. Bose Soundlink Revolve Bottom Circuit Board Replacement, Bottom Circuit Board: étape 6, image 1 de 1

    • Remove the yellow tape over the location where the ribbon from the central speaker meets the bottom circuit board.

    • Use the blue plastic opening tool to pry up the black latch holding down the ribbon.

    • Remove the motherboard from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autres ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Brian Butner

Membre depuis le 09/27/17

882 Réputation

3 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

USF Tampa, Team S6-G2, Remmell Fall 2017 Membre de l'équipe USF Tampa, Team S6-G2, Remmell Fall 2017

USFT-REMMELL-F17S6G2

4 membres

4 tutoriels rédigés

43 commentaires

I need the ribbon because it is damage, can you sell one to me?

My email is ttegil@hotmail.com can you send me the way I can buy it.

Kind regards

Gilberto - Réponse

Hello do toi fond thé ribbon because i have thé same problème .

M'y email adresse thualromain44.rt@gmail.com

Thanks you

romain thual -

Hi I need bottom circuit board for bose revolve , could you sale it for me. mail: seawolf1974@mail.ru , delivery to Spain

kindly regards

seawolf1974 - Réponse

I need bottom circuit board for Bose revolve, can I get it available in Nigeria, @sullivaniheme@gmail.com

Sullivan - Réponse

Hey there, I also require the bottom circuit board for my Bose Revolve sam.rowlands@hotmail.com

Sam - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 10

30 derniers jours : 64

Total : 15,197