Aller au contenu principal

Introduction

The audio cable is easy to remove. This requires absolutely no repair skills.

Outils

Aucun outil spécifié.

Pièces

Aucune pièce spécifiée.

  1. To start, make sure that the headphones are disconnected from any audio source.
    • To start, make sure that the headphones are disconnected from any audio source.

  2. Fold the earpads flat.
    • Fold the earpads flat.

  3. Pull off the earpad. When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.
    • Pull off the earpad.

    • When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

  4. Take the audio cable out of the clip.
    • Take the audio cable out of the clip.

  5. Pull out the audio cable.
    • Pull out the audio cable.

  6. Headphones remain.
    • Headphones remain.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Ashley Ryan

Membre depuis le 25/03/2012

5 084 Réputation

3 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

290 membres

827 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 4

7 derniers jours : 17

30 derniers jours : 91

Total : 5,160