Réparez vos affaires Communauté Boutique

Brentwood TS-292B Browning Dial Circuitboard Replacement

Introduction

This guide will show how to remove and replace the browning dial/circuit of the Brentwood TS-292B.

Ce dont vous avez besoin

  1. Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: étape 1, image 1 de 3 Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: étape 1, image 2 de 3 Brentwood TS-292B Browning Dial Circuitboard Replacement, Browning Dial Circuitboard: étape 1, image 3 de 3

    • Remove the five screws indicated using a Philips head screwdriver.

    Modifier

  2. Brentwood TS-292B Browning Dial Circuitboard Replacement: étape 2, image 1 de 2 Brentwood TS-292B Browning Dial Circuitboard Replacement: étape 2, image 2 de 2

    • Pull hard on the browning lever until it detaches from the toaster.

    • It will take some force to pull it off.

    • Once the tab is off, lift up on the housing to remove it from the toaster.

    Modifier

  4. Brentwood TS-292B Browning Dial Circuitboard Replacement: étape 3, image 1 de 1

    • Once the housing has been pulled upwards, carefully uplug the wire connecting the browning dial circuit board to the main circuit board.

    Modifier

  5. Brentwood TS-292B Browning Dial Circuitboard Replacement: étape 4, image 1 de 2 Brentwood TS-292B Browning Dial Circuitboard Replacement: étape 4, image 2 de 2

    • There are four screws on the circuit board for the browning dial.

    • Unscrew each of them with a Philips head screwdriver to detach the board and remove the board and dial from the toaster housing.

    Modifier

  6. Brentwood TS-292B Browning Dial Circuitboard Replacement: étape 5, image 1 de 2 Brentwood TS-292B Browning Dial Circuitboard Replacement: étape 5, image 2 de 2

    • There are two holes on the board where the pin from the browning dial can align.

    • Refer to the images if you are having trouble finding them.

    • Replace the browning dial by inserting the pin on the dial into one of the holes indicated.

    • Replace the entire circuit board if need be.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Elly Ayala

Membre depuis le 09/21/18

739 Réputation

5 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

University of North Texas, Team S8-G7, Riccardelli Fall 2018 Membre de l'équipe University of North Texas, Team S8-G7, Riccardelli Fall 2018

UNT-RICCARDELLI-F18S8G7

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 219