Réparez vos affaires Communauté Boutique

Breville JE98XL Juice Fountain Plus Food Pusher Replacement

Introduction

This guide will show you how to replace the food pusher that is responsible for pushing the ingredients into the blades of the juicer. Always remember to unplug the juicer before disassembling.

  1. Breville JE98XL Juice Fountain Plus Food Pusher Replacement, Pulp Basket: étape 1, image 1 de 1

    • Place the juicer on a flat surface. Make sure the juicer is unplugged and in the "off" position. For the following steps, the pulp basket is on the left.

    Traduire

  2. Breville JE98XL Juice Fountain Plus Food Pusher Replacement: étape 2, image 1 de 1

    • Tilt the juicer slightly to the right so the pulp basket is off of your surface.

    Traduire

  4. Breville JE98XL Juice Fountain Plus Food Pusher Replacement: étape 3, image 1 de 1

    • Pull the pulp basket down and out from under the juicer cover.

    Traduire

  5. Breville JE98XL Juice Fountain Plus Food Pusher Replacement, Lid: étape 4, image 1 de 2 Breville JE98XL Juice Fountain Plus Food Pusher Replacement, Lid: étape 4, image 2 de 2

    • Place one hand on either side of the safety locking arm.

    • Disengage the locking mechanism by pulling down on the lever with even pressure. The lever should be free to move up or down once it has been properly disengaged.

    Traduire

  6. Breville JE98XL Juice Fountain Plus Food Pusher Replacement: étape 5, image 1 de 2 Breville JE98XL Juice Fountain Plus Food Pusher Replacement: étape 5, image 2 de 2

    • Firmly grip both sides of the juicer. Twist clock-wise and lift to remove the lid.

    Traduire

  7. Breville JE98XL Juice Fountain Plus Food Pusher Replacement, Food Pusher: étape 6, image 1 de 2 Breville JE98XL Juice Fountain Plus Food Pusher Replacement, Food Pusher: étape 6, image 2 de 2

    • Place one hand on the food pusher grip, and pull upward. Continue to slide the food pusher until it has fully cleared the food chute.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Madison Burgess

Membre depuis le 10/06/16

499 Réputation

3 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Cal Poly, Team 15-1, Livingston Fall 2016 Membre de l'équipe Cal Poly, Team 15-1, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G1

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 464