Introduction

This repair guide shows how to install a new toner cartridge.

Outils

Aucun outil requis.

Pièces

  1. Press the front cover release button.
    • Press the front cover release button.

    • Keep the button pressed and pull the cover toward yourself.

  2. With the front cover in the downward position, the drum & toner unit will be visible.
    • With the front cover in the downward position, the drum & toner unit will be visible.

    • Grab the black-and-yellow handle on the unit. Lift unit up and pull it out of the printer.

    • The drum unit is the gray bottom half of the component in the picture, while the top black part is the toner cartridge.

    • Separate the toner cartridge from the drum unit by pressing down on the blue tab and gently lifting the toner cartridge up by the lift on the handle.

    • DO NOT TOUCH the roller bar on the toner cartridge, or the roller bar on the drum unit as illustrated in the pictures. This may cause a decrease in print quality.

    • Insert the toner cartridge into the new drum break by firmly sliding the cartridge into the drum unit. If installed correctly, the blue lever will be locked in a lifted position.

    • Be sure that the black nob located on the back of the toner cartridge is places inside the track located on the drum unit.

    • The third picture illustrates an incorrectly installed drum unit and toner cartridge, notice how the blue lever is down.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Tyler Davies

Membre depuis le 25/01/2010

73 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 4-14, Forte Winter 2010 Membre de l'équipe Cal Poly, Team 4-14, Forte Winter 2010

CPSU-FORTE-W10S4G14

5 membres

5 tutoriels rédigés

thanku for this useful information on how to replace toner cartridges for Brother HL-5240...its clear with the images used....most helpful indeed!!!

can also log on to http://www.tonertree.com for some exciting products!!!!

syed - Réponse

Thank you for this article! I helped me a lot! I have bought this model of toner http://hardware.nl/printkop/brother/ph11... but when I tried to replace it I failed. Now I did it and my printer work like a new one. Thank you one more time!

Scott Waschlerner - Réponse

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 19

Total : 10,923