Introduction
This guide will show you the steps necessary to deconstruct and replace the circuit board for this part.
Ce dont vous avez besoin
-
-
Insert a nylon or metal spudger under the plastic CHI spring covers. Pry them up to pop them off. Do this for each side.
-
-
-
-
Remove the (2) .27" Phillips head screws on each half of the CHI Original.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.