Réparez vos affaires Communauté Boutique

Canon EOS 40D Shutter Assembly Replacement

Introduction

An Error 99 is an non specific error which means that camera doesn't know or have a code for the problem. In my case the shutter assembly needed replacing. This was a fairly involved process for a beginner such as myself.

This is not a comprehensive guide but should be used in conjunction with the Canon Service Manual and youtube videos. I hope that some of the pictures I took along the way might help you identify or remember how each step works.

Ce dont vous avez besoin

  1. Canon EOS 40D Shutter Assembly Replacement, Shutter Assembly: étape 1, image 1 de 1

    • Get the Canon 40D Service Repair Manual

    • Have a clean and organized workspace. I labelled plastic trays by step number and put all items for each step in a separate tray.

    • Watch a couple Youtube videos on this process

    Modifier

  2. Canon EOS 40D Shutter Assembly Replacement: étape 2, image 1 de 2 Canon EOS 40D Shutter Assembly Replacement: étape 2, image 2 de 2

    • Peel off rubber grips

    Modifier

  3. Canon EOS 40D Shutter Assembly Replacement: étape 3, image 1 de 1

    • take off front piece

    Modifier

  5. Canon EOS 40D Shutter Assembly Replacement: étape 4, image 1 de 2 Canon EOS 40D Shutter Assembly Replacement: étape 4, image 2 de 2

    • take off rear

    • connectors disconnect by flipping black/brown tab up and sliding plastic tab out.

    Modifier

  6. Canon EOS 40D Shutter Assembly Replacement: étape 5, image 1 de 3 Canon EOS 40D Shutter Assembly Replacement: étape 5, image 2 de 3 Canon EOS 40D Shutter Assembly Replacement: étape 5, image 3 de 3

    • Take off top cover

    Modifier

  7. Canon EOS 40D Shutter Assembly Replacement: étape 6, image 1 de 3 Canon EOS 40D Shutter Assembly Replacement: étape 6, image 2 de 3 Canon EOS 40D Shutter Assembly Replacement: étape 6, image 3 de 3

    • take off bottom plate

    • disconnect and remove bottom board

    Modifier

  8. Canon EOS 40D Shutter Assembly Replacement: étape 7, image 1 de 1

    • remove CMOS assembly

    Modifier

  9. Canon EOS 40D Shutter Assembly Replacement: étape 8, image 1 de 1

    • remove metal back

    • remove and replace shutter assembly, transfering components that aren't on the new one

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autres ont terminé cette réparation.

2 commentaires

how do you replace the bridge (male portion on camera) other than putting the card in a card reader

wareibevictoriap - Réponse

how to replace the focus lock beeper

Dave Reitner - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 9

30 derniers jours : 59

Total : 7,180