Aller au contenu principal

Canon EOS Rebel G Back Panel Latch Replacement

Ce dont vous avez besoin

  1. Canon EOS Rebel G Back Panel Latch Replacement, Front Panel: étape 1, image 1 de 1
    • Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

  2. Canon EOS Rebel G Back Panel Latch Replacement: étape 2, image 1 de 2 Canon EOS Rebel G Back Panel Latch Replacement: étape 2, image 2 de 2
    • Using your finger, peel back the textured grip so the components are separated.

  3. Canon EOS Rebel G Back Panel Latch Replacement: étape 3, image 1 de 3 Canon EOS Rebel G Back Panel Latch Replacement: étape 3, image 2 de 3 Canon EOS Rebel G Back Panel Latch Replacement: étape 3, image 3 de 3
    • Using the flat end of a spudger, loosen the connection between the front panel and the device.

    • Remove the front panel using your hands.

  4. Canon EOS Rebel G Back Panel Latch Replacement, Back Panel Latch: étape 4, image 1 de 1
    • Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera.

    • Two 4.3 mm Phillips screws

  5. Canon EOS Rebel G Back Panel Latch Replacement: étape 5, image 1 de 1
    • Open the back panel by pushing the locking latch up.

    • Lift the latch cover off of the camera body.

  6. Canon EOS Rebel G Back Panel Latch Replacement: étape 6, image 1 de 1
    • Slide the side latch (for the back door) up and then lift straight away from the camera body.

    • Sometimes the latch will detach while pushing it up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zach

Membre depuis le 04/04/12

43 Réputation

8 tutoriels rédigés

Équipe

Cal Poly, Team 14-9, Forte Spring 2012 Membre de l'équipe Cal Poly, Team 14-9, Forte Spring 2012

CPSU-FORTE-S12S14G9

5 membres

36 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 10

Total : 2,529