Réparez vos affaires Communauté Boutique

Canon EOS Rebel G Viewfinder Replacement

Introduction

This guide will teach you how to remove the viewfinder from your camera.

Ce dont vous avez besoin

  1. Canon EOS Rebel G Viewfinder Replacement, Front Panel: étape 1, image 1 de 1

    • Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

    Traduire

  2. Canon EOS Rebel G Viewfinder Replacement: étape 2, image 1 de 2 Canon EOS Rebel G Viewfinder Replacement: étape 2, image 2 de 2

    • Using your finger, peel back the textured grip so the components are separated.

    Traduire

  3. Canon EOS Rebel G Viewfinder Replacement: étape 3, image 1 de 3 Canon EOS Rebel G Viewfinder Replacement: étape 3, image 2 de 3 Canon EOS Rebel G Viewfinder Replacement: étape 3, image 3 de 3

    • Using the flat end of a spudger, loosen the connection between the front panel and the device.

    • Remove the front panel using your hands.

    Traduire

  5. Canon EOS Rebel G Viewfinder Replacement, Top Panel: étape 4, image 1 de 1

    • Turn Camera over.

    • Using a #00 Phillips screw driver, unscrew the two 4.9 mm Phillips screws located on either side of the viewfinder.

    Traduire

  6. Canon EOS Rebel G Viewfinder Replacement: étape 5, image 1 de 1

    • Using a #00 Phillips screw driver, unscrew the one 5.7 mm Phillips screw located next to the LCD screen.

    Traduire

  7. Canon EOS Rebel G Viewfinder Replacement: étape 6, image 1 de 1

    • Lay the camera on its back.

    • Unsolder the flash connection from the motherboard as noted by the blue circle.

    Traduire

  8. Canon EOS Rebel G Viewfinder Replacement: étape 7, image 1 de 3 Canon EOS Rebel G Viewfinder Replacement: étape 7, image 2 de 3 Canon EOS Rebel G Viewfinder Replacement: étape 7, image 3 de 3

    • Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera.

    Traduire

  9. Canon EOS Rebel G Viewfinder Replacement, Viewfinder: étape 8, image 1 de 1

    • Unscrew the screws on either side of the viewfinder until the viewfinder can be lifted off

    • Two 8.5 mm Phillips screws

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Kyle Reis

Membre depuis le 04/02/12

52 Réputation

4 tutoriels rédigés

Badges: 16

+ 13 badges supplémentaires

Équipe

Cal Poly, Team 14-9, Forte Spring 2012 Membre de l'équipe Cal Poly, Team 14-9, Forte Spring 2012

CPSU-FORTE-S12S14G9

5 membres

36 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 13

Total : 2,930