Introduction
This guide details how to replace the flash bulb of this camera.
Ce dont vous avez besoin
-
-
Locate the battery cover at the bottom of the camera.
-
Pull down on the black tab to open the cover.
-
-
-
-
Using the Phillips screwdriver, unscrew the two 4.9mm Phillips head screws which are located underneath the flash.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
10 autres ont terminé cette réparation.
3 commentaires
how do you reverse step 6 - cutting the wires?
No parts required? So I can repair my flash not having to buy a new bulb? haha Please, I need the link from where I repair my burned built-in flash :/