Réparez vos affaires Communauté Boutique

Canon EOS Rebel T5 Motherboard Replacement

Introduction

If you find that your camera's motherboard has failed, and needs to be replaced, this guide will show you the steps necessary to complete this task.

Ce dont vous avez besoin

  1. Canon EOS Rebel T5 Motherboard Replacement, Battery: étape 1, image 1 de 1

    • Lay the camera on its back so that the card/battery door is facing you.

    • Using your fingernail, slide the tab on the battery door up to release the battery door latch.

    Traduire

  2. Canon EOS Rebel T5 Motherboard Replacement: étape 2, image 1 de 1

    • Lift the now free card/battery door to reveal the battery compartment.

    • Push the gray lever to the right side so that the battery can be removed and replaced with a new one.

    Traduire

  3. Canon EOS Rebel T5 Motherboard Replacement, Back Panel: étape 3, image 1 de 1

    • Turn the camera so that the back is facing to your right.

    • Remove the 5mm Phillips #000 screw above the rubber USB port cover.

    Traduire

  4. Canon EOS Rebel T5 Motherboard Replacement: étape 4, image 1 de 1

    • Remove the rubber piece.

    • Unscrew the two screws under the rubber cover to completely remove the rubber cover piece.

    • It is held in place by a notched tether, but can be easily manipulated to slide out.

    Traduire

  5. Canon EOS Rebel T5 Motherboard Replacement: étape 5, image 1 de 1

    • Turn your camera so that the bottom is facing you.

    • Remove the 5mm Phillips #000 screws.

    Traduire

  7. Canon EOS Rebel T5 Motherboard Replacement: étape 6, image 1 de 1

    • Now turn the camera so that the front is facing towards your right.

    • Remove the two remaining 5mm Phillips #000 screws.

    Traduire

  8. Canon EOS Rebel T5 Motherboard Replacement: étape 7, image 1 de 3 Canon EOS Rebel T5 Motherboard Replacement: étape 7, image 2 de 3 Canon EOS Rebel T5 Motherboard Replacement: étape 7, image 3 de 3

    • Now that all of the exterior screws have been removed, grip the camera firmly on both sides.

    • Gently pry the back panel from the main body of the camera.

    • There are two ribbon cables that need to be removed in order for the back panel to come free from the camera body, as indicated.

    • This back panel contains various control components of the camera as well as the LCD screen.

    Traduire

  9. Canon EOS Rebel T5 Motherboard Replacement, Motherboard: étape 8, image 1 de 1

    • Remove all ribbon cables with the plastic spudger.

    • Gently pry up the black plastic tabs to slide out the ribbon cables

    Traduire

  10. Canon EOS Rebel T5 Motherboard Replacement: étape 9, image 1 de 1

    • Turn your camera so that the top is facing you.

    • Remove the two black 5 mm Phillips #000 screws.

    Traduire

  11. Canon EOS Rebel T5 Motherboard Replacement: étape 10, image 1 de 3 Canon EOS Rebel T5 Motherboard Replacement: étape 10, image 2 de 3 Canon EOS Rebel T5 Motherboard Replacement: étape 10, image 3 de 3

    • Turn the grip side toward you.

    • Remove the rubber grip, using the plastic spudger.

    Traduire

  12. Canon EOS Rebel T5 Motherboard Replacement: étape 11, image 1 de 1

    • Remove the black 5 mm Phillips #000 screw, located under the grip.

    Traduire

  13. Canon EOS Rebel T5 Motherboard Replacement: étape 12, image 1 de 1

    • Remove the top panel of the device.

    Traduire

  14. Canon EOS Rebel T5 Motherboard Replacement: étape 13, image 1 de 2 Canon EOS Rebel T5 Motherboard Replacement: étape 13, image 2 de 2

    • Remove the front panel of the camera.

    Traduire

  15. Canon EOS Rebel T5 Motherboard Replacement: étape 14, image 1 de 3 Canon EOS Rebel T5 Motherboard Replacement: étape 14, image 2 de 3 Canon EOS Rebel T5 Motherboard Replacement: étape 14, image 3 de 3

    • Remove the five silver 5mm Phillips #000 screws.

    • The motherboard can now be removed.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

9 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Austin Tucker

Membre depuis le 08/27/15

1 027 Réputation

4 tutoriels rédigés

Badges: 16

+ 13 badges supplémentaires

Équipe

USF Tampa, Team 16-4, Wollert Fall 2015 Membre de l'équipe USF Tampa, Team 16-4, Wollert Fall 2015

USFT-WOLLERT-F15S16G4

4 membres

16 tutoriels rédigés

2 commentaires

This guide is amazing, but if you change the mainboard do you have to initialize it by software, like Spt?

Edgar Nunes - Réponse

New main board from canon .

How to instalize?

Thomas Nguyen - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 24

Total : 4,150