Introduction
Use this guide to replace the grip of the camera.
Ce dont vous avez besoin
-
-
Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
-
-
-
Remove three medium length screws from the bottom of the camera
-
-
-
-
Remove the two 4.5mm (.18in) long black screws from the camera grip using a #00 Phillips screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Un commentaire
Little confused. Some pics are from a analog Canon, other from a digital Canon...