Aller au contenu principal

Canon ImageCLASS MF4350d Speaker Replacement

Ce dont vous avez besoin

  1. Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Front Paneling: étape 1, image 1 de 1
    • Lift the printer lid up as shown in the photo.

  2. Canon ImageCLASS MF4350d Speaker Replacement: étape 2, image 1 de 2 Canon ImageCLASS MF4350d Speaker Replacement: étape 2, image 2 de 2
    • Locate and remove the two 10mm side screws. There is one on each side.

  3. Canon ImageCLASS MF4350d Speaker Replacement: étape 3, image 1 de 2 Canon ImageCLASS MF4350d Speaker Replacement: étape 3, image 2 de 2
    • Unhook the plastic panel from the printer starting from the top.

    • You may need to wiggle the panel a bit to loosen it.

    • To remove the bottom part of the paneling gently lay the printer on its back.

    • The scanner lid needs to be supported when moving the printer

  4. Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: étape 4, image 1 de 3 Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: étape 4, image 2 de 3 Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: étape 4, image 3 de 3
    • Gently unhook the right side paneling (as looking at the printer's front face) from the printer.

    • Use a gentle back and forth motion to wiggle the hooks out.

  5. Canon ImageCLASS MF4350d Speaker Replacement, Speaker: étape 5, image 1 de 1
    • Lay printer on its left side for better access to the speaker.

    • Note: The scanner lid needs to be supported when moving the printer

  6. Canon ImageCLASS MF4350d Speaker Replacement: étape 6, image 1 de 2 Canon ImageCLASS MF4350d Speaker Replacement: étape 6, image 2 de 2
    • Locate the black 7mm screw holding the speaker in place.

    • Using a Phillips head screw driver, unscrew the 7mm screw.

  7. Canon ImageCLASS MF4350d Speaker Replacement: étape 7, image 1 de 3 Canon ImageCLASS MF4350d Speaker Replacement: étape 7, image 2 de 3 Canon ImageCLASS MF4350d Speaker Replacement: étape 7, image 3 de 3
    • Locate the red and black wires connected to the speaker.

    • Undo the white clip holding the wires in place by pinching the tab on the top.

    • Remove the red and black wires from the wire bundle.

    • When replacing the old speaker, do not touch any part of the new speaker that is not metal other than the wires. Doing so could damage the speaker.

    • Lift out the speaker

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Helena Yanez

Membre depuis le 09/29/13

455 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 13-1, Forte Fall 2013 Membre de l'équipe Cal Poly, Team 13-1, Forte Fall 2013

CPSU-FORTE-F13S13G1

5 membres

16 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,347