Aller au contenu principal

Introduction

If your printed documents or images are becoming distorted due to a dysfunctional printhead, use this guide to replace the printhead.

Outils

Aucun outil spécifié.

Pièces

Aucune pièce spécifiée.

  1. Press the power button to turn on the printer.
    • Press the power button to turn on the printer.

  2. Pull down the front output tray cover.
    • Pull down the front output tray cover.

  3. Lift the printer lid.
    • Lift the printer lid.

  4. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  5. Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.
    • Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.

  6. Push in the white clip to release the ink cartridge from the printhead. Lift the ink cartridge from the printhead.
    • Push in the white clip to release the ink cartridge from the printhead.

    • Lift the ink cartridge from the printhead.

    • Repeat this process for the remaining ink cartridges.

    • You have successfully removed all ink cartridges.

  7. After removing all ink cartridges, lift the printhead lock lever.
    • After removing all ink cartridges, lift the printhead lock lever.

  8. Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.
    • Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.

  9. You have successfully removed your printhead.
    • You have successfully removed your printhead.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Caitlyn

Membre depuis le 07/10/2014

662 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team 1-3, Leahy Fall 2014 Membre de l'équipe USF Tampa, Team 1-3, Leahy Fall 2014

USFT-LEAHY-F14S1G3

3 membres

4 tutoriels rédigés

fairly helpful, especially the photo's. but I need advice on how to clean the printhead before trying to replace it,

a1halber - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 12

30 derniers jours : 65

Total : 4,406