Introduction
The camera lens is located on the front side of the overall case. This guide will show you how to repair the broken or malfunctioned lens.
Ce dont vous avez besoin
-
-
Use a Phillips #00 screwdriver to remove the two screws at the bottom of the camera.
-
-
-
-
Follow the instructions in the prerequisite guide Disassembling the Canon PowerShot A200 Case.
-
Use the Phillips screwdriver to unscrew the 7 screws that hold the camera body to the camera case. The location of the screws are noted in the photo. Set the screws aside.
-
Pull out the camera body from the outside camera casing.
-
Use the metal tweezers to unplug the connector from the other side of the camera case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.