Aller au contenu principal

Canon PowerShot A540 Front Cover Replacement

Ce dont vous avez besoin

  1. Canon PowerShot A540 Front Cover Replacement, Back Cover: étape 1, image 1 de 2 Canon PowerShot A540 Front Cover Replacement, Back Cover: étape 1, image 2 de 2
    • Turn off the camera.

    • Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.

  2. Canon PowerShot A540 Front Cover Replacement: étape 2, image 1 de 1
    • Turn the camera upside down to view the "Card/Batt. Open" Cover.

    • Use a Phillips head #000 screwdriver to remove the three (3) 4.0 mm screws.

  3. Canon PowerShot A540 Front Cover Replacement: étape 3, image 1 de 1
    • Open "Card/Batt. Open" Cover.

    • Remove the one (1) 5.0 mm screw with the Phillips head #000 screwdriver.

  4. Canon PowerShot A540 Front Cover Replacement: étape 4, image 1 de 1
    • Turn the camera to the right side of the LCD screen.

    • Remove the three (3) 4.0 mm screws with the Phillips head #000 screwdriver.

  5. Canon PowerShot A540 Front Cover Replacement: étape 5, image 1 de 3 Canon PowerShot A540 Front Cover Replacement: étape 5, image 2 de 3 Canon PowerShot A540 Front Cover Replacement: étape 5, image 3 de 3
    • Gently remove the back cover.

    • Start at the bottom at the corner of the "Card/Batt. Open" Cover.

    • Then move onto the other edges and the top.

    • It may be tight at the top!

  6. Canon PowerShot A540 Front Cover Replacement, Front Cover: étape 6, image 1 de 2 Canon PowerShot A540 Front Cover Replacement, Front Cover: étape 6, image 2 de 2
    • Turn the camera to view the front.

    • Remove the lens guard.

    • Press the lens guard's button as you turn the guard counterclockwise.

  7. Canon PowerShot A540 Front Cover Replacement: étape 7, image 1 de 1
    • Turn the camera to the side left of the LCD screen.

    • Remove the one (1) 4.0 mm screw with the Phillips head #000 screwdriver.

  8. Canon PowerShot A540 Front Cover Replacement: étape 8, image 1 de 1
    • Remove the front cover gently.

    • When removing the front cover, a thin, black rubber washer may fall off the lens. If it does, make sure to put it back on the lens before reassembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Carley Fuller

Membre depuis le 03/23/15

434 Réputation

3 tutoriels rédigés

Équipe

Baylor, Team 7-12, Williams Spring 2015 Membre de l'équipe Baylor, Team 7-12, Williams Spring 2015

BU-WILLIAMS-S15S7G12

3 membres

20 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 21

Total : 1,455