Introduction

This guide demonstrates how to take off the camera casing and easily pop the broken button back into place.

Pièces

Aucune pièce nécessaire.

Unlock the battery cover, while swinging  the cover outward to open it.
  • Unlock the battery cover, while swinging the cover outward to open it.

Ajouter un commentaire

Turn the camera over and allow the batteries to fall out.
  • Turn the camera over and allow the batteries to fall out.

  • Close the battery cover.

Ajouter un commentaire

  • Remove the three 3 mm screws that attach the side panel to the body of the camera.

  • Using your fingernails, pull the side panel outward to remove it.

  • Remove the two remaining 2 mm screws that attach to the frame of the camera.

Ajouter un commentaire

  • Remove the 3 mm screw that sits at the bottom of the camera, near the front side.

  • Remove the 4 mm screw that sits at the bottom of the camera, near the back side.

Ajouter un commentaire

  • Open the battery cover.

  • Remove the 5 mm screw that sits on the top of the battery slot.

  • Remove the three 6 mm screws that sit at the bottom of the battery slot.

  • Close the battery cover.

Ajouter un commentaire

  • Open the digital A/V DC terminal cover.

  • Remove the three 4 mm screws.

  • Detach the digital A/V DC terminal.

  • When you reassemble the camera, leave the topmost screw out until after you put the top casing back.

Ajouter un commentaire

  • Grip the sides of the top cover and gently lift the cover until it detaches from the camera.

  • Do not completely remove the top cover; an orange ribbon cable still connects it to the camera.

Ajouter un commentaire

  • Open the battery cover.

  • With the camera upside down, pull the front case's side that is closest to you, in an outward movement.

  • Apply some force, but pull it gently to prevent damage.

Ajouter un commentaire

  • Open the memory card slot cover.

  • Remove the 3 mm screw that sits near the bottom of the case.

Ajouter un commentaire

  • Flip the LCD screen all the way open.

  • Grip both sides of the back case's top and gently pull it, in an outward movement, until the case detaches.

Ajouter un commentaire

  • Remove the back casing.

  • Flip the casing over and push on the back of the broken button with either your finger or a blunt object until it realigns into its slot.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Ramirez

Membre depuis le 20/01/2011

620 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 11-26, Maness Winter 2011 Membre de l'équipe Cal Poly, Team 11-26, Maness Winter 2011

CPSU-MANESS-W11S11G26

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 4,802