Pièces

Aucune pièce nécessaire.

Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.
  • Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.

  • Remove batteries.

Ajouter un commentaire

Remove the three indicated .2mm screws using a Philips #00 screwdriver.
  • Remove the three indicated .2mm screws using a Philips #00 screwdriver.

  • Gently pull off side-panel to remove it.

Ajouter un commentaire

  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

Ajouter un commentaire

  • Remove the indicated .2mm screw using a Philips #00 screwdriver.

  • Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Philips #00 screwdriver.

Ajouter un commentaire

  • Open 'DIGITAL A/V OUT' door on camera.

  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

Ajouter un commentaire

  • Grip the sides of the top panel and gently pull to separate the top panel from the camera body.

  • The top panel will not completely detach.

Ajouter un commentaire

  • Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels.

  • Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Kelly Duggan

Membre depuis le 13/10/2014

439 Réputation

3 tutoriels rédigés

Équipe

Clemson, Team 2-5, Benson Fall 2014 Membre de l'équipe Clemson, Team 2-5, Benson Fall 2014

CLEM-BENSON-F14S2G5

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 361