Pièces

Aucune pièce nécessaire.

Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.
  • Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.

  • Remove batteries.

Ajouter un commentaire

Remove the three indicated .2mm screws using a Philips #00 screwdriver.
  • Remove the three indicated .2mm screws using a Philips #00 screwdriver.

  • Gently pull off side-panel to remove it.

Ajouter un commentaire

  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

Ajouter un commentaire

  • Remove the indicated .2mm screw using a Philips #00 screwdriver.

  • Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Philips #00 screwdriver.

Ajouter un commentaire

  • Open 'DIGITAL A/V OUT' door on camera.

  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

Ajouter un commentaire

  • Grip the sides of the top panel and gently pull to separate the top panel from the camera body.

  • The top panel will not completely detach.

Ajouter un commentaire

  • Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels.

  • Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.

Ajouter un commentaire

  • Use the spudger to gently pull back the retaining clip and pull the ribbon out

  • The top panel should now be completely detached from the camera

  • Applying to much force to the spudger may damage the retaining clip

Ajouter un commentaire

  • Remove the two screws holding down the metal frame using the Phillips #00 screwdriver

Ajouter un commentaire

  • Lift up the metal frame to expose the two screws located under the trigger button.

  • Remove the two screws using Phillips #00 screwdriver

Ajouter un commentaire

  • Trigger button should fall out

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kelly Duggan

Membre depuis le 13/10/2014

439 Réputation

3 tutoriels rédigés

Équipe

Clemson, Team 2-5, Benson Fall 2014 Membre de l'équipe Clemson, Team 2-5, Benson Fall 2014

CLEM-BENSON-F14S2G5

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 234