Introduction

Use this guide to replace the Canon PowerShot A75's batteries.

Turn the camera over and locate the "BATT OPEN" sliding switch.
  • Turn the camera over and locate the "BATT OPEN" sliding switch.

Ajouter un commentaire

Slide the switch to the right.
  • Slide the switch to the right.

    • The battery cover should slide down and spring open.

Ajouter un commentaire

  • Remove the 4 AA batteries.

    • Watch for the orientation of the batteries as they slide out.

    • The battery orientation is shown under the battery flap itself and on a sticker next to the battery flap.

Ajouter un commentaire

Conclusion

Put in fresh batteries. Gently shut the flap and slide it forward until you hear a click.

Henry Braden Fisk

Membre depuis le 16/04/2012

63 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 17-30, Amido Spring 2012 Membre de l'équipe Cal Poly, Team 17-30, Amido Spring 2012

CPSU-AMIDO-S12S17G30

5 membres

6 tutoriels rédigés

Hi, there is a problem with my Powershot a75. Whenever I switch it on, it just says change the batteries even though they are either new, or fully charged. Thanks

Harry collier - Réponse

had same trouble i fix it buy pressing the print button on back next to the disp button it should work then

hot5 - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 646