Aller au contenu principal

Introduction

To isolate the LCD screen, one needs to be gentle with separating parts and removing screws from the camera.

Pièces

Aucune pièce spécifiée.

  1. Unscrew the two 2.9 mm screws on the side of the screen that connect the front and back cover of the LCD screen. Use a #00 screwdriver.
    • Unscrew the two 2.9 mm screws on the side of the screen that connect the front and back cover of the LCD screen. Use a #00 screwdriver.

  2. Unscrew the 2.9 mm side screws on the other side of the screen using the #00 screwdriver. These also hold the screen covers together. To get to the second screw, rotate the screen.
    • Unscrew the 2.9 mm side screws on the other side of the screen using the #00 screwdriver. These also hold the screen covers together.

    • To get to the second screw, rotate the screen.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Gently peel off the front and back cover of the screen. Peel back the plastic cover. Peel back the plastic cover.
    • Gently peel off the front and back cover of the screen.

    • Peel back the plastic cover.

  5. Gently pull off the screen from the base.
    • Gently pull off the screen from the base.

    • A small metal piece between the screen cover and the screen may fall out during repair. Remember to replace it with the rounded corners facing away from the screen during reassembly.

    • This takes a little force.

  6. Unplug the wires that are attaching the screen to the circuit board.
    • Unplug the wires that are attaching the screen to the circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

konrad

Membre depuis le 11/01/2011

217 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 7-31, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 7-31, Regan Winter 2011

CPSU-REGAN-W11S7G31

6 membres

6 tutoriels rédigés

MY screen is dark after touched water, do I need to change this screen? Where can I buy this screen? How much?

Thank you for the guidance.

jennifer

yu123xi@yahoo.com

yu123xi - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 4

7 derniers jours : 7

30 derniers jours : 9

Total : 3,372