Aller au contenu principal

Introduction

Replacing the Canon-PowerShot G12 HDMI port is a highly-invasive step-intensive process that becomes necessary if the HDMI port sustains damage due to a crack, water, or jams, or if the HDMI port no longer functions properly.

In this guide, you will learn how to replace the HDMI port carefully without damaging any essential internal components.

  1. Open the back cover of the camera, see steps 1-6 in Canon PowerShot G12 Rear Function Setting Dial Replacement
  2. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  3. On the right side of the camera looking from the back, locate the HDMI port and use a spudger to remove it.
    • On the right side of the camera looking from the back, locate the HDMI port and use a spudger to remove it.

  4. Insert the new HDMI port until you hear a click on both sides, ensuring the holes match up with the ports on the camera.
    • Insert the new HDMI port until you hear a click on both sides, ensuring the holes match up with the ports on the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathan Meuwissen

Membre depuis le 23/02/2015

490 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 1-5, Leahy Winter 2015 Membre de l'équipe USF Tampa, Team 1-5, Leahy Winter 2015

USFT-LEAHY-W15S1G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 21

Total : 1,269