Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the knot on the wrist lanyard.
-
Remove the battery and the memory card.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Begin removing the screws on the bottom of the outer casing.
-
Next, remove the rest of the screws from the outer casing.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Open the "A/V Out Digital" cover. Remove the screw inside.
-
Gently pull off the back casing.
-
Remove the black "L" shaped piece of metal.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three screws that are holding the screen in place. Free the screen from the underlying components.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With the spudger, gently lift the black flap that is holding the wide ribbon cable wire in place.
-
Unplug the wide ribbon cable.
-
Unplug the narrow ribbon cable to free the LCD screen from the camera body.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the L-shaped corner trim containing the picture button.
-
Carefully unplug the connection cable that is attached.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the selector wheel from the top corner of the camera.
-
Carefully remove the ribbon cable connection with a set of tweezers.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With a Phillips #00 Screwdriver, unscrew the zoom toggle switch and remove it from the camera.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With a Phillips #00 Screwdriver, unscrew the flash board.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the cable connection. With a metal spudger, gently pry up.
-
Remove the ribon cable. With a metal spudger, gently lift up the black tab.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the flash bulb unit upwards from the camera.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the entire three-part flash assembly from the camera.
-