Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Canon PowerShot SD1000 Broken Flash Unit Replacement

Ce dont vous avez besoin

  1. Canon PowerShot SD1000 Broken Flash Unit Replacement, Back Panel: étape 1, image 1 de 2 Canon PowerShot SD1000 Broken Flash Unit Replacement, Back Panel: étape 1, image 2 de 2
    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

  2. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 2, image 1 de 1
    • Remove the two 2.9 mm screws from the camera bottom panel.

  3. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 3, image 1 de 1
    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

  4. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 4, image 1 de 1
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 5, image 1 de 1
    • Remove the small cover panel and the attached wrist strap mount.

  6. Canon PowerShot SD1000 Broken Flash Unit Replacement, Front Case: étape 6, image 1 de 1
    • Remove the front cover by gently pulling it away from the camera body.

  7. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 7, image 1 de 1
    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

  8. Canon PowerShot SD1000 Broken Flash Unit Replacement, LCD Screen: étape 8, image 1 de 1
    • Remove the two 2.4 mm screws located at the top of the LCD panel.

  9. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 9, image 1 de 2 Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 9, image 2 de 2
    • Pull up the metal frame surrounding the LCD screen starting at the side of the camera.

  10. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 10, image 1 de 1
    • Push the metal frame away from the metal tab using the spudger to detach the frame.

    • Rotate the metal frame upwards.

    • The metal framing should be attached by a metal tab towards the bottom of the camera, near the function buttons.

  11. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 11, image 1 de 2 Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 11, image 2 de 2
    • Carefully lift the metal frame from the camera.

    • Remove the black LCD screen, leaving the thin lens pieces in place.

    • BE CAREFUL; both components are attached by an orange connector ribbon and cannot be removed yet.

  12. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 12, image 1 de 3 Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 12, image 2 de 3 Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 12, image 3 de 3
    • Carefully pull on the orange connector ribbon to disconnect the LCD screen.

    • The LCD screen can be pulled out of the frame before disconnecting its connector ribbon.

    • Tweezers are helpful to disconnect the ribbon.

  13. Canon PowerShot SD1000 Broken Flash Unit Replacement, Broken Flash Unit: étape 13, image 1 de 2 Canon PowerShot SD1000 Broken Flash Unit Replacement, Broken Flash Unit: étape 13, image 2 de 2
    • Remove the metal frame on the side closest to the flash mechanism. This will expose the screw securing the flash assembly.

  14. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 14, image 1 de 1
    • Remove the screw securing the flash assembly.

    • Note: The screw is 2.4mm long.

  15. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 15, image 1 de 1
    • Use the spudger to carefully disconnect the flash assembly ribbon from the black connector lock.

  16. Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 16, image 1 de 2 Canon PowerShot SD1000 Broken Flash Unit Replacement: étape 16, image 2 de 2
    • Remove the flash assembly.

    • Note: BE CAREFUL, when handling the flash assembly; touching the capacitor (the black cylinder) could shock you

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Phillip Phung

Membre depuis le 01/19/12

624 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 8-18, Maness Winter 2012 Membre de l'équipe Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 11

Total : 3,129