Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Remove the two 2.9 mm screws from the side panel closest to the camera lens. Remove the two 2.9 mm screws from the side panel closest to the camera lens.
    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

  2. Remove the two 2.9 mm screws from the camera bottom panel.
    • Remove the two 2.9 mm screws from the camera bottom panel.

  3. Remove the two 2.9 mm screws from the side panel farthest from the lens.
    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

  4. Pull the back panel away from the camera body, starting at the end with the function buttons.
    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. Remove the small cover panel and the attached wrist strap mount.
    • Remove the small cover panel and the attached wrist strap mount.

  6. Remove the front cover by gently pulling it away from the camera body.
    • Remove the front cover by gently pulling it away from the camera body.

  7. Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.
    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Phillip Phung

Membre depuis le 19/01/2012

518 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 8-18, Maness Winter 2012 Membre de l'équipe Cal Poly, Team 8-18, Maness Winter 2012

CPSU-MANESS-W12S8G18

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 1,092