Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #00 driver to remove the four 2.0 mm Phillips screws on the camera housing.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #1 driver to remove the one 4.0 mm Phillips screw located on the bottom of the camera.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the face housing from the body of the camera.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the camera over and remove the rear housing.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the button panel if it did not fall out on its own.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #0 driver to remove the one 3.0 mm Phillips copper screw from the top of the camera.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #0 driver to remove the one 3.0 mm Phillips silver screw from the rear face of the camera.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic spudger to lift the golden film off of the microchip on the front face of the camera, exposing a screw.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #0 driver to remove the one 3.0 mm Phillips screw.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a metal spudger to carefully pry the small black tab away from the connector that secures one end of the golden film.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully insert a metal spudger under the two clusters of wires that are plugged into the small chip on the face of the camera.
-
Pull the wires parallel to the face of the camera to disconnect them from the small chip.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The image capture button housing can now be removed from the body of the camera and replaced.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.