Introduction
This guide is required in order to replace any of the deeper components in the camera. Any component of the camera cannot be reached unless the back cover is removed.
Ce dont vous avez besoin
-
-
Remove the 2mm screw from the back of the camera.
-
Remove two 2mm screws from the bottom of the camera.
-
Remove two 2mm screws the left side of camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
University of North Texas, Team S5-G3, Thompson Fall 2018 Membre de l'équipe University of North Texas, Team S5-G3, Thompson Fall 2018
UNT-THOMPSON-F18S5G3
4 membres
5 tutoriels rédigés
