Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn off the camera by pressing the power button above the LCD screen.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two, small screws on the bottom of the camera using a Phillip's #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #00 screwdriver to remove the two, small screws on the right side of the camera.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out Digital label.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #00 screwdriver, remove the screw on the bottom of the camera near the battery and memory card slots.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the front, back, and side casings from the camera and set to the side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two screws that connect the LCD and backlight to the main body of the camera.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently pry the LCD and the backlight from the main body of the camera.
-
Gently pry the LCD from the backlight.
-
The thin ribbon cable is for the backlight.
-
The thick ribbon cable is for the LCD screen.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully lift the ZIF connector that covers the thick ribbon cable.
-
This ZIF connector is fragile. Use caution when lifting it from its down position.
-
Insert the new LCD and reassemble the camera.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.