Réparez vos affaires Communauté Boutique

Canon PowerShot SD700 Motherboard Replacement

Introduction

Follow this step by step installation guide for replacing the motherboard on your Canon Powershot SD700 IS camera.

In order to make the process easier please view our more indepth guide on taking off the camera's casing in the LCD replacement guide.

Ce dont vous avez besoin

  1. Canon PowerShot SD700 Motherboard Replacement, Outside Case: étape 1, image 1 de 1

    • Turn off the camera by pressing the power button above the LCD screen.

    Modifier

  2. Canon PowerShot SD700 Motherboard Replacement: étape 2, image 1 de 1

    • Remove the two small screws on the bottom of the camera using a Phillips #00 screwdriver.

    Modifier

  3. Canon PowerShot SD700 Motherboard Replacement: étape 3, image 1 de 1

    • Use a Phillips #00 screwdriver to remove the two small screws on the right side of the camera.

    Modifier

  4. Canon PowerShot SD700 Motherboard Replacement: étape 4, image 1 de 1

    • Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out digital label.

    Modifier

  5. Canon PowerShot SD700 Motherboard Replacement: étape 5, image 1 de 1

    • Use a Phillips #00 screwdriver to remove the screw on the bottom of the camera near the battery and memory card slots.

    • This screw will be longer than the rest of the screws.

    Modifier

  6. Canon PowerShot SD700 Motherboard Replacement: étape 6, image 1 de 1

    • Remove the front, back, and side casings from the camera and set to the side.

    Modifier

  8. Canon PowerShot SD700 Motherboard Replacement, Motherboard: étape 7, image 1 de 1

    • Detach the LCD and backlight.

    • Remove the larger screw.

    • Remove the two smaller sized screws.

    • Remove the small screw.

    • Remove the small screw.

    Modifier

  9. Canon PowerShot SD700 Motherboard Replacement: étape 8, image 1 de 1

    • Remove the two screws near the the tripod mount using a Phillips #00 screwdriver.

    Modifier

  10. Canon PowerShot SD700 Motherboard Replacement: étape 9, image 1 de 1

    • Remove the screw next to the shutter on the top of the camera with a Phillips screwdriver.

    Modifier

  11. Canon PowerShot SD700 Motherboard Replacement: étape 10, image 1 de 1

    • Remove the orange ribbon cable by lifting the ZIF connector attached to the ribbon with a spudger.

    Modifier

  12. Canon PowerShot SD700 Motherboard Replacement: étape 11, image 1 de 2 Canon PowerShot SD700 Motherboard Replacement: étape 11, image 2 de 2

    • Carefully lift the shutter along with the ribbon connected to it. This will remove the casing around the motherboard.

    Modifier

  13. Canon PowerShot SD700 Motherboard Replacement: étape 12, image 1 de 3 Canon PowerShot SD700 Motherboard Replacement: étape 12, image 2 de 3 Canon PowerShot SD700 Motherboard Replacement: étape 12, image 3 de 3

    • With the motherboard casing detached, remove the short orange ribbon by lifting the ZIF connector with a spudger or other plastic opening tools and slide the ribbon out. Detaching this ribbon will disconnect the side of the camera containing the motherboard from the rest of the camera.

    Modifier

  14. Canon PowerShot SD700 Motherboard Replacement: étape 13, image 1 de 2 Canon PowerShot SD700 Motherboard Replacement: étape 13, image 2 de 2

    • Disconnect the wires that are attached to the motherboard.

    • Remove the film by lifting it gently from the motherboard.

    Modifier

  15. Canon PowerShot SD700 Motherboard Replacement: étape 14, image 1 de 1

    • Remove the last wires connected to the motherboard by gently lifting upwards.

    Modifier

  16. Canon PowerShot SD700 Motherboard Replacement: étape 15, image 1 de 2 Canon PowerShot SD700 Motherboard Replacement: étape 15, image 2 de 2

    • Use a spudger to gently lift the circuit board.

    Modifier

  17. Canon PowerShot SD700 Motherboard Replacement: étape 16, image 1 de 2 Canon PowerShot SD700 Motherboard Replacement: étape 16, image 2 de 2

    • Remove the screw using a Phillips #00 screwdriver.

    • Gently lift the motherboard away from the case.

    Modifier

  18. Canon PowerShot SD700 Motherboard Replacement: étape 17, image 1 de 2 Canon PowerShot SD700 Motherboard Replacement: étape 17, image 2 de 2

    • Remove the screw.

    • Once the screw is removed, you can remove the board.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 8 autres contributeurs

Kenneth Lim

Membre depuis le 04/07/11

61 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Cal Poly, Team 9-71, Walters Spring 2011 Membre de l'équipe Cal Poly, Team 9-71, Walters Spring 2011

CPSU-WALTERS-S11S9G71

4 membres

9 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 1,394