Aller au contenu principal

Introduction

Remove the back cover before removing LCD.

Pièces

Aucune pièce spécifiée.

  1. Remove one 2.25mm screw on the bottom.
    • Remove one 2.25mm screw on the bottom.

  2. Remove two 2.25mm screws on the right side looking from the front.
    • Remove two 2.25mm screws on the right side looking from the front.

  3. Remove one 4.7mm screw on the side with the AV output.
    • Remove one 4.7mm screw on the side with the AV output.

  4. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  5. Pull off the back cover.
    • Pull off the back cover.

    • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

  6. Remove 2 2.4mm screws on bottom.
    • Remove 2 2.4mm screws on bottom.

  7. Follow the small data cable to where it connects to the camera.
    • Follow the small data cable to where it connects to the camera.

    • Lift the back white portion to unlock the cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

  8. Gently lift LCD display off.
    • Gently lift LCD display off.

    • There will be two data cables still attached to the camera. Do not break them.

    • There may be a loose strip of metal along the inner side of the LCD display for a secure fit.

  9. Follow the larger cable to where it connects to the camera.
    • Follow the larger cable to where it connects to the camera.

    • Lift the front black portion of the connector to unlock the data cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Jeremy Rabaino

Membre depuis le 10/10/2010

135 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 20-9, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 20-9, Maness Fall 2010

CPSU-MANESS-F10S20G9

5 membres

6 tutoriels rédigés

where can I buy a replacement LCD screen for a SD800 IS

ALFRED - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,106