Réparez vos affaires Communauté Boutique

Canon PowerShot SX160 IS Function Wheel Replacement

Introduction

This guide provides a breakdown that shows how to replace the function wheel on your Canon PowerShot SX160 IS by disassembling a portion of the camera to access the function wheel.

Ce dont vous avez besoin

  1. Canon PowerShot SX160 IS Function Wheel Replacement, Function Wheel: étape 1, image 1 de 3 Canon PowerShot SX160 IS Function Wheel Replacement, Function Wheel: étape 1, image 2 de 3 Canon PowerShot SX160 IS Function Wheel Replacement, Function Wheel: étape 1, image 3 de 3

    • Unscrew the 2-4.8mm black Phillips head screws from the front of the camera using a #0 Phillips screwdriver.

    • Unscrew the 2-4.8mm black Phillips head screws from the side of the camera using a #0 Phillips screwdriver.

    • Unscrew the 3-4.8mm black Phillips head screws from the bottom of the camera using a #0 Phillips screwdriver.

    Modifier

  2. Canon PowerShot SX160 IS Function Wheel Replacement: étape 2, image 1 de 2 Canon PowerShot SX160 IS Function Wheel Replacement: étape 2, image 2 de 2

    • Using your hands, gently separate the back panel from the camera.

    • Continue to pull the back panel until it completely detaches from the camera.

    Modifier

  4. Canon PowerShot SX160 IS Function Wheel Replacement: étape 3, image 1 de 2 Canon PowerShot SX160 IS Function Wheel Replacement: étape 3, image 2 de 2

    • Use a #0 phillips screwdriver to unscrew the 3-3.75mm silver Phillips head screws from the function wheel panel of the camera.

    Modifier

  5. Canon PowerShot SX160 IS Function Wheel Replacement: étape 4, image 1 de 1

    • Remove and replace the function wheel.

    Modifier
Conclusion

Congratulations, you have successfully replaced your function wheel. To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Jamie Secretan

Membre depuis le 03/11/15

1 962 Réputation

6 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Colorado Springs, Team 2-3, Panko Spring 2015 Membre de l'équipe Colorado Springs, Team 2-3, Panko Spring 2015

UCCS-PANKO-S15S2G3

3 membres

6 tutoriels rédigés

Un commentaire

Hi, I replaced the LCD screen but now my function wheel and panel don’t work. I think the ribbon got disconnected , but I can’t figure out where to attach it. Can you help?

Denise Domian - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 3

Total : 564