Introduction
This guide walks you through how to replace a shutter button on your Canon PowerShot SX160 IS by disassembling a portion of the camera to access the non operational piece.
Ce dont vous avez besoin
-
-
Unscrew 2-4.8mm black screws from the front of the camera using a #0 Phillips screwdriver.
-
Unscrew 2-4.8mm black screws from the side of the camera using a #0 Phillips screwdriver.
-
Unscrew 2-4.8mm black screws from the bottom of the camera using a #0 Phillips screwdriver.
-
-
Congratulations, you have successfully replaced your shutter button. To reassemble your device, follow these instructions in reverse order.
Congratulations, you have successfully replaced your shutter button. To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
2 commentaires
did you ever figure out where to get a new button?