Réparez vos affaires Communauté Boutique

Canon PowerShot SX260 HS Motherboard Replacement

Ce dont vous avez besoin

  1. Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: étape 1, image 1 de 3 Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: étape 1, image 2 de 3 Canon PowerShot SX260 HS Motherboard Replacement, Motherboard: étape 1, image 3 de 3

    • *Be sure to always remove the battery from the camera before disassembling to avoid permanent damage.

    • There are a total of 6 (3mm) external screws that will need to be removed; 2 on the left side, 2 on the bottom, and 2 on the right side.

    • 1.) Remove the 2 screws on the left side

    • 2.) Remove the 2 screws on the bottom of the camera.

    • 3.) Remove the 2 screws on the right side of the camera.

    Modifier

  2. Canon PowerShot SX260 HS Motherboard Replacement: étape 2, image 1 de 1

    • Use spludger tool or small flathead screw driver to gently lift and remove back face plate.

    Modifier

  3. Canon PowerShot SX260 HS Motherboard Replacement: étape 3, image 1 de 1

    • After removing exterior screws, gently lift off the front face plate.

    Modifier

  4. Canon PowerShot SX260 HS Motherboard Replacement: étape 4, image 1 de 1

    • After removing the front faceplate you will find 4 (3mm) screws on the interior.

    • Remove all 4 interior screws.

    Modifier

  6. Canon PowerShot SX260 HS Motherboard Replacement: étape 5, image 1 de 1

    • Remove 1 (6 mm) Screw from the bottom of the silver metal plate. The screw is also silver

    Modifier

  7. Canon PowerShot SX260 HS Motherboard Replacement: étape 6, image 1 de 1

    • With blue spludger tool gently lift the metal plate from the face of the camera.

    • The plate is held by a piece of double sided tape so there will be a bit of resistance.

    Modifier

  8. Canon PowerShot SX260 HS Motherboard Replacement: étape 7, image 1 de 1

    • Remove 3 (3 mm) screws from the top surface of the motherboard.

    • You will notice that there is one on the top, and 2 on the bottom in a triangular shape.

    Modifier

  9. Canon PowerShot SX260 HS Motherboard Replacement: étape 8, image 1 de 1

    • Gently remove the ribbon cable from the top of the motherboard with a pair of tweezers.

    • Be careful during this step not to rip or tear the cable.

    Modifier

  10. Canon PowerShot SX260 HS Motherboard Replacement: étape 9, image 1 de 1

    • Use the blue spludger tool to gently unplug the last ribbon cable that is attached to the motherboard.

    Modifier

  11. Canon PowerShot SX260 HS Motherboard Replacement: étape 10, image 1 de 2 Canon PowerShot SX260 HS Motherboard Replacement: étape 10, image 2 de 2

    • Remove the motherboard with your fingers.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Tyler Kelch

Membre depuis le 03/05/15

622 Réputation

4 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Sam Houston State, Team 11-8, Blackburne Winter 2015 Membre de l'équipe Sam Houston State, Team 11-8, Blackburne Winter 2015

SHSU-BLACKBURNE-W15S11G8

2 membres

4 tutoriels rédigés

2 commentaires

Where is the internal clock/calendar battery located?

GPa Rocks - Réponse

Internal clock battery is under circuit board on right side of lens as seen in photo for Step 9. See 2:48 - 3:19 in this video: https://www.youtube.com/watch?v=Awmm6hDm....

Paul Unger - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 8

30 derniers jours : 23

Total : 2,103