Canon PowerShot SX520 HS Lens Replacement

Introduction

If you crack the lens of your camera or if it is not functioning properly, this guide may be for you. This guide will help you remove and replace the lens.

Ce dont vous avez besoin

Étape 1 Battery

Canon PowerShot SX520 HS Lens Replacement, Battery: étape 1, image 1 de 1

Using your fingers, slide the battery compartment door to the right until it unlocks.

Modifier

Étape 2

Rotate the door along hinges to open.
Take out the battery with your fingers.

Modifier

Étape 3 Back Face

Canon PowerShot SX520 HS Lens Replacement, Back Face: étape 3, image 1 de 3

Canon PowerShot SX520 HS Lens Replacement, Back Face: étape 3, image 2 de 3

Canon PowerShot SX520 HS Lens Replacement, Back Face: étape 3, image 3 de 3

Remove 2-3.4 mm screws that secure the back panel using a Phillips #000 screwdriver.
Remove 4-4 mm screws on the left and right sides of the camera using a Phillips #000 screwdriver.

Modifier

Étape 4

Remove 2-4 mm screws that secure the bottom of the camera using a Phillips #000 screwdriver.

Modifier

Étape 5

Pull back the rubber facing to access the A/V and HDMI output compartment.
Remove 1-3.4mm screw inside the compartment using a Phillips #000 screwdriver.

Modifier

Étape 6

Once all screws are removed, pull the back facing off with your fingers.

Modifier

Étape 7 LCD Screen

Canon PowerShot SX520 HS Lens Replacement, LCD Screen: étape 7, image 1 de 1

Remove 3-4.4 mm screws that secure the small metal plate using a Phillips #000 screwdriver.

Modifier

Étape 8

Carefully pop out the LCD screen with your fingers.

Modifier

Étape 9 Metal Plate

Canon PowerShot SX520 HS Lens Replacement, Metal Plate: étape 9, image 1 de 3

Canon PowerShot SX520 HS Lens Replacement, Metal Plate: étape 9, image 2 de 3

Canon PowerShot SX520 HS Lens Replacement, Metal Plate: étape 9, image 3 de 3

Remove 6-4.4 mm screws that secure the metal cover using a Phillips #000 screwdriver.
Remove 2-2.5 mm screws that secure the back panel using a Phillips #000 screwdriver.
After all 8 screws are removed, pull the metal plate out with your fingers.

Modifier

Étape 10 Lens

Canon PowerShot SX520 HS Lens Replacement, Lens: étape 10, image 1 de 1

Unlcip the large cable by pulling up on the metal part with your finger.
Slide out the 2 smaller cables with your fingers.

Modifier

Étape 11

Lift up the lens by grabbing the sides with your fingers.

Modifier

Como consigo más sesiones completas estoy en limpieza de mi cámara canon powershot sx 520 hs que se me cayó en una posa sucia y necesito desarmarla por completa para limpiarla y me gustaría conseguir un manual completo para desarmarla y armarla de nuevo gracias / la cámara estaba apagada al lograrla sacar le quite la batería para que no sufriera ningún daño

Leonardo Fabio Castro Cruz - 27 oct. 2022 Réponse