Réparez vos affaires Communauté Boutique

Canon Powershot A610 Speaker Replacement

Introduction

The speaker is on the underside of the top casing and will involve some minor technical skills.

Ce dont vous avez besoin

  1. Canon Powershot A610 Speaker Replacement, Speaker: étape 1, image 1 de 3 Canon Powershot A610 Speaker Replacement, Speaker: étape 1, image 2 de 3 Canon Powershot A610 Speaker Replacement, Speaker: étape 1, image 3 de 3

    • Locate and remove the three screws attaching the side panel.

    • Remove the side paneling and the two remaining screws attached to the frame of the camera.

    Traduire

  2. Canon Powershot A610 Speaker Replacement: étape 2, image 1 de 1

    • Remove the two screws on the bottom panel of the camera.

    Traduire

  3. Canon Powershot A610 Speaker Replacement: étape 3, image 1 de 1

    • Open the battery cover.

    • Locate and remove the four screws inside. One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.

    • Close the battery cover.

    Traduire

  4. Canon Powershot A610 Speaker Replacement: étape 4, image 1 de 2 Canon Powershot A610 Speaker Replacement: étape 4, image 2 de 2

    • Open the "DIGITAL AV OUT" door on the camera.

    • Remove the three screws. The door can be removed from the camera.

    Traduire

  5. Canon Powershot A610 Speaker Replacement: étape 5, image 1 de 1

    • Gripping the sides of the top cover, gently pull apart the top cover from the camera.

    • The top cover does not completely detach.

    Traduire

  6. Canon Powershot A610 Speaker Replacement: étape 6, image 1 de 2 Canon Powershot A610 Speaker Replacement: étape 6, image 2 de 2

    • Open the battery cover.

    • Gently pull apart the front cover from the camera.

    • This may require some force. Be careful not to break the plastic.

    Traduire

  7. Canon Powershot A610 Speaker Replacement: étape 7, image 1 de 2 Canon Powershot A610 Speaker Replacement: étape 7, image 2 de 2

    • Using a thin tool, push the black attachment away from the white connection piece to detach the connector ribbon.

    Traduire

  8. Canon Powershot A610 Speaker Replacement: étape 8, image 1 de 1

    • Remove the 3mm screw holding the metal frame.

    Traduire

  9. Canon Powershot A610 Speaker Replacement: étape 9, image 1 de 2 Canon Powershot A610 Speaker Replacement: étape 9, image 2 de 2

    • Use an unfolded paper clip to push the speaker from the top of the casing out towards the bottom.

    • Use a bit of force as the speaker is glued into the top casing.

    • There is a soft fabric speaker cover separating the speaker from the casing. Make sure not to remove it from its position in the housing.

    Traduire

  10. Canon Powershot A610 Speaker Replacement: étape 10, image 1 de 1

    • Unsolder the speaker at two points and reattach the new speaker.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 8 autres contributeurs

Matthew Ramirez

Membre depuis le 01/20/11

625 Réputation

5 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

Cal Poly, Team 11-26, Maness Winter 2011 Membre de l'équipe Cal Poly, Team 11-26, Maness Winter 2011

CPSU-MANESS-W11S11G26

3 membres

9 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 2,914