Introduction
In this guide, the process of partially breaking down the Canon Powershot S110 and replacing the option dial will be explained in detail.
Ce dont vous avez besoin
-
-
Remove the battery by sliding open the battery cover on the bottom of the camera.
-
-
-
Remove the six screws by using a small Phillips head screwdriver.
-
Remove the two screws on the side of the camera on either side of the HDMI input panel.
-
Remove the two screws on the opposite side of the camera.
-
Remove the two screws on the bottom of the camera located on either side of the tripod mounting hole.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.