Introduction

Take off outer cover, detach cable, and remove Release Button.

Squeeze the sides of the plastic connector while gently detaching the cable. Your shutter release button is now removed and can be replaced. The shutter release button assembly should only be attached by a small red and black wire, with a plastic connector at the end.
  • Squeeze the sides of the plastic connector while gently detaching the cable. Your shutter release button is now removed and can be replaced.

    • The shutter release button assembly should only be attached by a small red and black wire, with a plastic connector at the end.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stanley

Membre depuis le 30/01/2011

369 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 4-33, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 4-33, Regan Winter 2011

CPSU-REGAN-W11S4G33

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 894